Products

Trapylen® 186 S is a chlorinated polypropylene with a higher chlorine content compared to other Trapylen® grades. It demonstrates good compatibility with other resins and polymers, excellent pigment wetting, and forms a high-gloss, chemically resistant film. The primary merit of Trapylen® 186 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene.

Trapylen® 130 S is a chemically modified low-chlorinated polypropylene celebrated for its remarkable affinity to polyolefinic plastics, including PP, PP/EPDM-blends, and, with certain limitations in adhesion strength, PE. Versatile in its applications, it serves as either a straight primer or an adhesion promoter for base coats and pigmented primers. Its primary use extends to paintings and coatings for molded parts and sealing profiles in the automotive industry, encompassing applications such as bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals. Moreover, it is employed in industrial settings where PP-based plastics undergo chemical pretreatment.

Trapylen® 145 X 5 is a chemically modified low-chlorinated polypropylene renowned for its remarkable affinity to polyolefinic plastics, including PP, PP/EPDM-blends, and, with certain limitations in adhesion strength, PE. The resin in Trapylen® 145 X 5 is characterized by a higher molecular weight within the range of 110,000 and a significantly lower chlorine content compared to other maleic-modified Trapylen® grades. These specific properties contribute to improved adhesion, as well as enhanced heat and chemical resistance. It is primarily utilized as a straight primer, with its principal application in the treatment of molded parts and sealing profiles in the automotive industry, including bumpers, side panels, and door seals.

Trapylen® 950 S is a newly developed chlorine-free polyolefin that exhibits exceptional adhesion properties specifically on polyolefin substrates such as polypropylene, PP/EPDM thermoplastic rubbers, and, to a certain extent, polyethylene. Notably, it demonstrates favorable solubility in non-aromatic solvents. This grade finds application as an adhesion promoter in printing inks, adhesives, and paints, serving both as an adhesion booster and a straight primer.

Trapylen® 137 T is a chemically modified low-chlorinated polypropylene renowned for its exceptional affinity to polyolefinic plastics like PP, PP/EPDM blends, and, to a certain extent, PE. It serves a dual purpose as both a straight primer and an adhesion promoter, proving valuable for base coats and pigmented primers. Its primary application lies in the realm of paintings and coatings for molded components and sealing profiles within the automotive sector, spanning areas like bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals, as well as in various industrial applications where chemically pretreated PP-based plastics are employed.

Trapylen® 5550 UV is a chemically modified low-chlorinated polypropylene dissolved in a reactive, UV-curable monomer known as isobornyl acrylate (IBOA). This formulation exhibits outstanding affinity for polyolefinic plastics such as PP, PP/EPDM thermoplastic rubbers and reasonable adhesion to PE. Trapylen® 5550 UV was specifically developed as an adhesion additive for UV-curing printing inks, making it suitable for applications in the printing industry.

Trapylen® 911 S is newly developed chlorine-free polyolefin with excellent adhesion properties on polyolefinic substrates such as polypropylene, PP/EPDM thermoplastic rubbers and with limitations to adhesion strength - as well to polyethylene. Further advantage of this grade is its good solubility in non-aromatic solvents. TRAPYLEN® 911 S is used as adhesion promoter for in printing inks, adhesives and paints, or as a straight primer.

Trapylen® 6800 W is an adhesion promoter based on chemically modified, low-chlorinated polypropylene dissolved in water. It has outstanding affinity to polyolefinic substrates. It is especially developed to improve surface tension of treated and untreated films, foils, foams and even molded parts of PP, PE, polyolefinic blends,a.o. The increase of wetting properties permits the bonding, printing, flocking and painting of such substrates. TRAPYLEN® 6800 W can be occassionally used as adhesion promoter incorporated in adhesives, inks and paints in case of sufficient compatibility.

Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 9350 W serves as a versatile adhesion promoter or primer for film applications. It can be applied through spraying, dipping, brushing, or printing methods. This adhesion promoter is formulated with chemically modified polypropylene dissolved in water, exhibiting exceptional compatibility with polyolefin substrates. Specifically designed to enhance surface tension on treated and untreated PP, PE, and polyolefin blend films, foils, foams, and molded parts.

Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.

Trapylen® 196 S is a primer and adhesion promoter system designed for coating, bonding, printing, and laminating polyolefinic plastics. The primary raw materials it is compatible with include chlorinated polyolefins (CPO), chlorine-free modified polyolefins (APO), and polyurethanes (PUR). Notably, Trapylen® 196 S exhibits good heat seal properties, making it suitable for various applications in the mentioned areas. Xylene is utilized as the solvent in this formulation.

Trapylen® 920 S is newly developed chlorine-free polyolefin with excellent adhesion properties on polyolefinic substrates such as polypropylene, PP/EPDM thermoplastic rubbers and - with limitations to adhesion strength as well to polyethylene. Further advantage of this grade is its good solubility in non-aromatic solvents. TRAPYLEN® 920 S is used as adhesion promoter for in printing inks, adhesives and paints, or as a straight primer.

Trapylen® 196 X is a low-chlorinated liquid polypropylene, presenting as a slightly yellowish, higher-viscous liquid. It exhibits generally excellent adhesion to polypropylene, PP-modified thermoplastic rubbers, and, with certain limitations, to polyethylene. The primary application of Trapylen® 196 X is as a primer in surface treatment and as an adhesion promoter for adhesives in the processing of polyolefins. This includes various processes such as painting, printing, bonding, and laminating, among others.

Trapylen® 113 X is a chemically modified low-chlorinated polypropylene distinguished by its exceptional affinity to polyolefinic plastics, including PP, PP/EPDM-blends, and, to a limited extent in adhesion strength, PE. Notably, it features a higher molecular weight and a narrow molecular weight distribution compared to other modified chlorinated types. With a reduced content of maleic anhydride, this product exhibits excellent compatibility properties with other binder resins. Trapylen® 113 X is versatile, serving as either a straight primer or an adhesion promoter for base coats and pigmented primers. Its primary application lies in paintings and coatings for molded parts, particularly sealing profiles in the automotive industry, such as bumpers, side panels, and door seals.