Laripur® RS 8580 is a polyester-based thermoplastic polyurethane (TPU) that is notable for its sustainable sourcing. It is produced using raw materials derived from renewable sources. In fact, approximately 60% of the total carbon content in Laripur® RS 8580 is sourced from renewable materials, as calculated based on its composition. This sustainability aspect makes it a responsible choice for various applications that require both performance and eco-friendliness.

Polymer Name: Thermoplastic Polyurethane (Polyester based)

Processing Methods: Extrusion

End Uses: Film, Footwear, Hoses, Profiles

Ask P.A.T. Products Questions

Leo Coyle avatarErik Espling avatarLogan York avatar
Message our experts with questions
Erik Espling avatar

Erik Espling

Executive/Management

30 years experience with plastic resins, inks and coatings. Specializing in TPU, CASE, liquid color dispersions, UV, antistats, and texturing agents.

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Processing Recommendations

The material needs to be dried for 3 hours at 80°-90°C prior to processing, preferably using a dehumidifying drier feeded with air with a dew point lower than -30°C.
Indicative suggested molding temperature profile:

Zone Temperature
Zone 1 185°C
Zone 2 190°C
Zone 3 195°C
Nozzle 190°C

Being affected by type of machine used, processing conditions and downstream equipment, the temperature profiles as given above has to be considered as just indicative. The grades suitable for extrusion are identified with the EG or AE end code and therefore they have to be ordered with such code when used in this application.

Properties

Physical Form
Physico-Chemical Properties
ValueUnitsTest Method / Conditions
Tensile Strength45N/mm²DIN 53504
Tensile Modulus (at 50%)5N/mm²DIN 53504
Tensile Modulus (at 300%)12N/mm²DIN 53504
Tensile Modulus (at 100%)6.4N/mm²DIN 53504
Tear Strength70N/mmDIN 53515
Specific Gravity1.19g/cm³DIN 53479
Hardness84Shore ADIN 53505
Abrasion Loss35mm³DIN 53516
Elongation (at Break)620%DIN 53504

Packaging & Availability

Packaging Type
Regional Availability
  • Canada
  • USA
Packaging Information

Laripur® RS 8580 is supplied in regular pellet form and it is packaged in 25 kg bags or 500 kg and 1000 kg octabins.

Storage & Handling

Shelf Life
6 months
Storage Information

Laripur® RS 8580 must be stored in its original and sealed containers and kept in a dry and well ventilated place; avoiding the direct sun radiation. The shelf life of Laripur® RS 8580 will be 6 months from the date of delivery to the final customer, when stored in its original sealed packaging and in proper conditions.