Trapylen® 8000 has outstanding adhesion to various polyolefinic plastics and was developed specially as a ready to use primer with good paintability for TPO-foils. For increased demands concerning adhesion and resistance of the coat (heat and chemicals) it is advisable to crosslink TRAPYLEN® 8000 with polyisocyanates based on HDI oder TDI in a dosage of 2%. The surface tension of the foils should have abt. 50...52 mN/m.

Product Type: Primer

Compatible Substrates & Surfaces: Foils, Plastics, Thermoplastic Polyolefin (TPO)

Features: Good Adhesion, Low Viscosity

Technical Data Sheet

Ask P.A.T. Products Questions

Leo Coyle avatarErik Espling avatarLogan York avatar

Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Ready-to-Use Product Features

Applications & Uses

Compatible Substrates & Surfaces
  • Typical application quantity in range of 0.5 - 1.5 g/m² (dried film), drying condition should be 30s at 80°C.
  • Pot life: minimum 8 h using it as 2 pack system.


Physical Form
Soluble in
Typical Properties
ValueUnitsTest Method / Conditions
Chlorine Content2.5%-
Solid Content10.0%-
Solid Content10.2%-
Flow Timeapprox. 11seconds-

Packaging & Availability

Packaging Type
Regional Availability
  • Canada
  • Mexico
  • USA
Packaging Information

Iron drums of 170 kg net. Other packing on request.

Storage & Handling

Storage and Shelf Life Conditions

Atleast 6 months in closed packing at 15°C. Stir before use.