Deuteron® LE 100 LV stands as a 100% active conductivity additive leveraging tetraalkyl-ammonium ethyl sulfate. These anti-static additives facilitate fine-tuning surface and volume resistivity across various systems. Deuteron LE 100 LV is a carrier-free liquid that ensures easy integration without introducing potentially undesirable solvents into a system. These products blend seamlessly into all solvent mixtures commonly employed in coatings, although slight turbidity might occur. They are solvent-free, fluid, and effortlessly dosed at room temperature.

Functions: Anti-Static Agent, Wetting Agent

Chemical Family: Quaternary Ammonium Compounds

Labeling Claims: Solvent-free

Compatible Polymers & Resins: Epoxies (EP)

Features: Anti-Static, Good Anti-Static Properties, High Polarity, Low Viscosity

Technical Data Sheet

Ask P.A.T. Products Questions

Leo Coyle avatarErik Espling avatarLogan York avatar

Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Industrial Additives Functions

Features & Benefits

Labeling Claims
Industrial Additives Features
Product Highlights
  • The use of our anti-static additives allows the adjustment of the surface and volume resistivity in various systems.
  • The effect of Deuteron®’s anti-static additives is mainly based on surface migration and the ionic character of the cations.
  • Deuteron® LE 512 is a solid, waxy material that needs to be diluted in a suitable solvent (water, alcohol or polar esters) prior to use. Alternatively, the material can be
  • molten (temperatures between 95 °C and 110 °C) and used directly.
  • Deuteron® LE 100 LV is a liquid product free of any carrier and thus easy to use without adding any potentially undesired solvents to a system.
  • The products are miscible in all solvent mixtures commonly used in coatings, partly slight turbidity can occur.

Applications & Uses

Compatible Polymers & Resins
Cure Method
Industrial Additives End Use
Ink & Toner Type
Use Level
0.2 - 5%

Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe soles), UV- or electron-beam curing screen inks to avoid electrostatic charge.
The suitability of the product in further fields of application has to be checked by the user.
Fields of application include:

  • Electrostatic adjustment of spray paints
  • PU systems (foam, shoe soles and casting resins)
  • UV and EB curable systems
  • PVC
  • Floor coatings
  • Synergistic wetting agent for carbon blacks, graphite and carbon fibers

Typical addition level 0.2% - 5%. The exact quantities to be used depend on the system and must be determined individually for the intended application.

Processing Information
  • Deuteron® LE 512 can be used to prepare an interme- diate by diluting at room temperature in suitable polar solvents or water.
  • Direct processing is only possible after melting. The melting temperature should be in a range of 95 °C - 110 °C and to ensure proper distribution the molten product should be added while stirring.
  • Deuteron® LE 100 LV can be added to the system at any time during the production process or they can be used as post addition additives to further adjust resistivity.


Physical Form
Yellowish liquid
Soluble in
Lacquer solvents
Physical Properties
ValueUnitsTest Method / Conditions
Viscosityapprox. 3500mPa.s-
Specific Weightapprox. 1.05g/cm³-
Hydroxyl Valueapprox. 185--
Acid Valueapprox. 13mg KOH/g
Densityapprox. 1.05g/cm³
pH (1 % in water)approx. 8.5
Active Content100%
Typical Properties
ValueUnitsTest Method / Conditions
Densityapprox. 1.05g/cm³-
Viscosityapprox. 3500mPa.s-
Acid Numberapprox. 13mg KOH/g-
pH Value (as 1% in water)approx. 8.5--

Packaging & Availability

Regional Availability
  • Canada
  • Mexico
  • USA
Packaging Information
  • Steel drum (25 kg net)
  • Steel drum (200 kg net)
  • IBC (900 kg net)

Storage & Handling

Shelf Life
24 months
Storage and Shelf Life Conditions
  • 24 months in tightly closed original containers at room temperature.
  • At low temperatures a viscosity increase or solidification can occur.
  • The product can be regenerated by applying gentle heat. The temperature should not exceed 40 °C.