Deuteron® UV RS20

Deuteron® UV RS20 is suitable for all 100 % UV curing coatings and printing inks in particular for solvent-free systems.

The use of Deuteron® UV RS20 especially improves performance in:

• Smooth / slip surface properties
• Very low impact on viscosity
• Water-repellent surfaces
• Mechanical properties
• No adverse effect on flexibility

Dosage

• 1 - 15 % (calculated on the complete formulation) depending on binder, application and required properties.
• The optimum dosage can vary significantly and is highly dependent on the used resins, monomers and initiators.

Processing

• The incorporation should be done without shear forces only with a stirrer at a late stage of production to avoid foaming. Grinding processes should be avoided. It can be added either pre-diluted or pure.

• Steel drum (25 kg net)
• Steel drum (200 kg net)

• 12 months at room temperature and dry conditions.
• Storage temperature should not exceed 35 °C.
• Stir well before use as phase separation can occur while storing.