Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Coating Type
- Applications
Application: Using TRAPYLEN® 822 X as a primer dilute the resin solution with xylene to 5 % solids. This primer can be applied by spraying, dipping, brushing or printing.
- Drying conditions: 30 s at 80 °C, residual quantity of resin about 3 - 4 g/m².
When using TRAPYLEN® 822 X as adhesion promoter in base coats/pigmented primers, the compatibility of the system must be checked. The resulting base coat can be applied by spraying, dipping, brushing or printing if the system allows it.
- Drying conditions: Usually 30 min at 80 °C, residual quantity about 15 g/m².
Uses: TRAPYLEN® 822 X is used either as a straight primer or as an adhesion promoter for base coats and pigmented primers. Its principal use is in paintings/coatings for molded parts and sealing profiles in the automotive industry, such as bumpers, side panels and door seals. TRAPYLEN® can also be used in adhesives and flocking agents for door seals. Furthermore it is used in industrial applications where PP based plastics are chemically pretreated.
Properties
- Physical Form
- Appearance
- Low viscous yellow to orange liquid
- Typical Properties
Value Units Test Method / Conditions Solid Content 20.0 % - Viscosity 60 - - Chlorine Content 24.5 % - Softening Point 77 °C -
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
At least 6 months in closed packing at 15°C
Storage & Handling
- Storage and Shelf Life Conditions
- Gel formation is possible at lower temperatures.
- Before use it is strictly recommended to keep the drums at 40 - 50°C for a while until the solution returns to liquid phase.
- Gel formation is reversible and has no influence on the product´s quality.
- Both available with 5 % solids and dry resin.
- At least 6 months in closed packing at 15 °C